Make a Trouser Part -1
This tutorial will help you make the first pair of your pants. If you've already made some in
The past and are just looking for a summary, you probably want to tutorial refresher. Note pants are not Sex even one style for all.
You will need:
- Almost textile 1.5M (you will not use all of this, but you will probably need this much to fit the pattern On)
- needle thread
- Measuring tape
- Pencil / chalk
- Pins
- Sewing machine (if you want to cheat)
- Rope (to hold your pants up)
Measurements:
You will need to note down six measurements before you can start the celebration.
The outer leg length - from the waist to the ankle down the outer part of the leg (this on your
Hip, not the bottom of the front of your leg). Once you're done, add 2 inches for the waist band.
Inner leg length - from the thigh to the ankle
Showing hip - circumference widest point (either around the hips or bum, depending on
Your shape. Choose the larger of these measurements). Once you have completed your measurement, and quarter it.
Hip width - wider circumference of the thigh points. Half of this measurement and
Add 1 inch to rest you do not want this thing to be too tight)
Ankle display - the area around the ankle (make sure you can get your foot through!)
Then half of that.
Along the bottom - Imagine your waist line. You need to measure from front to
Back, between your legs to your waist line. Once you have this measurement, half and add 2 inches.
IMPORTANT - Once you have this, adding 1/2 inch (1.5CM) for all to allow the layers.
To mark out:
Put your fabric and fold over about 1/3. Make sure your outer leg length is at least as long as the
fold. If not, fold the fabric in the other direction. Measure and mark out your outer leg length to fold.
At one end, on the occasion of the ankle display at right angles to the fold. At the other end on the occasion of the hip show in
same way.
